CR-V Installation Guide: 
Front Bumper Guard Installation Guide


difficulty ~
time ~ 45 minutes
Step 1: Removing the Front Grill

Remove all 4 screws located on top of the front grill with an screwdriver.
Loosen the 2 screws with an long screwdriver.  (It is not necessary to remove it.)
*IMPORTANT*
Slightly bend (do not over bend, damage may occur) the front grill, in order to gain access to the screw located in the center.  Loosen it with an long screwdriver.  (It is not necessary to remove it.)
Step 2: Installing the Front Bumper Guard

Remove the plastic snap on screw from the bumper.  Carefully place the front bumper guard and secure it with nuts and bolts which come with the package.
Secure the front bumper guard with nuts and bolts as shown in the picture.
Step 3: Install back the Front Grill

Lastly, secure the front grill back in its place with its original screws.